Description: Every gas meter is placed in this feature class within a few feet of its approximate real-world X,Y location.SVC_PIPE_ID and SEG_ID: both are identifiers that refer to the pipe feature that the meter is connected to.WORK_ORDER: Identical to in this feature class SAP_IDSAP_ID: The number of the SAP notification that describes the meter being installed. Can be used to find the meter in SAP.LOCATION: Physical address or lot number where the meter is located. Typically formatted [Full street name][Four digit street number]. Ex) Druid Avenue 0500LINETYPE: The material the line is made of.VALUE: Leftover CAD fieldZONE: The service area is divided into zones based on key valves. This records which zone the meter is in.BLDG_CATEGORY: The type of building the meter is recording the usage for: residential or commercial.NOTICE_DATE: The date that the
Description: This file represents the City of Charlottesville's Gas Anode layer in a point format. The Gas Anode layer (a separate file) is continually updated on a daily basis by City staff from the Public Utilities Division. Location data for the Gas Anode layer are received by Public Utilities staff (from various sources, such as GPS, plats, site plans etc.) and incorporated into this layer. The information contained in this file is NOT to be construed or used as a "legal description". Any errors or omissions should be reported to Public Utilities for correction.
Description: This file represents the City of Charlottesville's Gas Curb Valves layer in a point format. The Gas Curb Valves layer (a separate file) is continually updated on a daily basis by City staff from the Public Utilities Division. Location data for the Gas Curb Valves layer are received by Public Utilities staff (from various sources, such as GPS, plats, site plans etc.) and incorporated into this layer. The information contained in this file is NOT to be construed or used as a "legal description". Any errors or omissions should be reported to Public Utilities for correction.
Description: This file represents the City of Charlottesville's Gas Drips layer in a point format. The Gas Drips layer (a separate file) is continually updated on a daily basis by City staff from the Public Utilities Division. Location data for the Gas Drips layer are received by Public Utilities staff (from various sources, such as GPS, plats, site plans etc.) and incorporated into this layer. The information contained in this file is NOT to be construed or used as a "legal description". Any errors or omissions should be reported to Public Utilities for correction.
Description: This file represents the City of Charlottesville's Gas Lamps layer in a point format. The Gas Lamps layer (a separate file) is continually updated on a daily basis by City staff from the Public Utilities Division. Location data for the Gas Lamps layer are received by Public Utilities staff (from various sources, such as GPS, plats, site plans etc.) and incorporated into this layer. The information contained in this file is NOT to be construed or used as a "legal description". Any errors or omissions should be reported to Public Utilities for correction.
Description: This file represents the City of Charlottesville's Gas Nodes layer in a point format. The Gas Nodes layer (a separate file) is continually updated on a daily basis by City staff from the Public Utilities Division. Location data for the Gas Nodes layer are received by Public Utilities staff (from various sources, such as GPS, plats, site plans etc.) and incorporated into this layer. The information contained in this file is NOT to be construed or used as a "legal description". Any errors or omissions should be reported to Public Utilities for correction.
Service Item Id: 5c0b7ae0186046839858a27dea1017b3
Copyright Text: Mary Zylowski Engineering Technician City of Charlottesville - Public Utilities Gas Division 305 4th St. NW Charlottesville, VA 22903 (434)-970-3815
Description: This file represents the City of Charlottesville's Gas Regulators layer in a point format. The Gas Regulators layer (a separate file) is continually updated on a daily basis by City staff from the Public Utilities Division. Location data for the Gas Regulators layer are received by Public Utilities staff (from various sources, such as GPS, plats, site plans etc.) and incorporated into this layer. The information contained in this file is NOT to be construed or used as a "legal description". Any errors or omissions should be reported to Public Utilities for correction.
Description: REQUIRED: A brief narrative summary of the data set.
Service Item Id: 5c0b7ae0186046839858a27dea1017b3
Copyright Text: Mary Zylowski Engineering Technician City of Charlottesville - Public Utilities Gas Division 305 4th St. NW Charlottesville, VA 22903 (434)-970-3815
Label Placement: esriServerLinePlacementAboveAlong Label Expression: [PIPE_SIZE] CONCAT "in " CONCAT [WALL_DESCR] Use Coded Values: true Symbol:
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 10 Font Family: Tahoma Font Style: normal Font Weight: normal Font Decoration: none
Description: This file represents the City of Charlottesville's Gas Inserted Casing Pipe layer in a point format. The Gas Inserted Casing Pipe layer (a separate file) is continually updated on a daily basis by City staff from the Public Utilities Division. Location data for the Gas Inserted Casing Pipe layer are received by Public Utilities staff (from various sources, such as GPS, plats, site plans etc.) and incorporated into this layer. The information contained in this file is NOT to be construed or used as a "legal description". Any errors or omissions should be reported to Public Utilities for correction.
Description: Structure ID: Structure naming convention is [Two letter storm basin abbreviation][Unique four-digit ID].Type: IN: Inlet, JB: Junction Box, MH: Manhole, OF: Outfall, Other: other structure type. Write in Notes. VDOT DI Class: Only relevant if the structure is an inlet (Leave blank if not an inlet). Name of the type of inlet based on VDOT DI (drop inlet) classes. Area: area inlet. Includes grate inlets (DI-1 and DI-7), Curb: Curb-opening inlet (DI-3), Combo: Combination inlet (DI-2). Basically, a curb inlet that also has a grate in front. Trench: trench drains. DI Type: Only relevant if the structure is an inlet (Leave blank if not an inlet). Integer referring to the VDOT DI Type. Most common are DI-1, 2, 3, and 7. Refer to VDOT Road and Bridge Standards, Section 100: Drainage.Owner: Structure can be owned by the CITY, PRIV - Private entity, or UVA.Easement: Presence of public easement. N/A applies to City-owned pipes on City-owned property or in the right-of-way (ROW) as a public easement is not needed. Status: LIVE or ABD (abandoned).Size: Length x width of structure opening in feet. Diameter if structure is an outfall. Specify “ if in inches. Material: Construction method/material. Depth: Depth to base of structure in feet measured from top/rim of structure. Elevation: Rim elevation or top of inlet elevation for structure. If the structure is an outfall, invert of the outfall. Z Source: Source of elevation values. Can be from As-Built, Survey, Survey-grade GPS, or Map-grade GPS.Z Date: Date elevation data was obtained in the case of GPS or survey or approved in the case of As-Builts and survey that are part of a site plan.XY Source: Source for XY location of pipe. Can be from As-Built, Survey, Survey-grade GPS, or Map-grade GPS.XY Date: Date XY location data was obtained in the case of GPS or survey or approved in the case of As-Builts and survey that are part of a site plan.Lines In: Number of pipes leading into structure.Lines Out: Number of pipes leading out of structure.MS4: If this structure is an outfall, whether it is an MS4 outfall. An MS4 outfall is generally defined as the point where a municipal separate storm sewer discharges to surface waters. This does not include culverts connecting two sections of stream or small private systems. Most MS4 outfalls should convey flow from public pipes or a large drainage system. Notes: Clarifying information about the structure. Primarily for notes about if the structure can be accessed, is paved over/covered, cannot be found, cannot be opened, etc.
Description: PipeID: Pipe naming convention is [upstream structure ID]-[downstream structure ID]. Structure naming convention is [Two letter storm basin abbreviation][Unique four-digit ID]. If more than one pipe has the same upstream and downstream structure, a suffix lowercase letter is added to each structure ID. Example: Two pipes with the same upstream and downstream structures could be named SS0551a-SS0101a and SS0551b-SS0101b.Type: Pipe – closed conveyance system, Culvert – tunnel carrying a stream or open conveyance under a road or railroad, Open – all open channels such as streams, ditches, swales, etc. See Streams GIS layer to determine if streams that are classified as natural waterways. If the pipe is of type Other, details can be listed in Notes.Owner: Line can be owned by the CITY, PRIV - Private entity, or UVA. PRIV (UNCONFIRMED) indicates the pipe is believed to be private but a deed search to check if there is a public easement is needed. Easement: Y/A presence of public easement. N/A applies to City-owned pipes on City-owned property or in the right-of-way (ROW) as a public easement is not needed. Status: LIVE or ABD (abandoned).Size: If there are multiple barrels, include the number of barrels in parentheses at the beginning. Default unit is feet. Specify “ if in inches. Diameter of circular pipes. Length x width of culverts. Include major axis and minor axis of elliptical pipes and note unusual shape in Notes. Example: A 10 ft long 8 fit wide triple barreled box culvert would have its size noted (3) 10x8.Top Width: Top width of open channels.Material: RCP: Reinforced Concrete Pipe, HDPE: High-density Polyethylene, VC: Vitrified Clay, PVC: Polyvinyl chloride, CMP: Corrugated Metal Pipe, DIP: Ductile Iron Pipe. If pipe has been lined: RCP w/ liner, HDPE w/ liner, VC w/ liner, PVC w/ liner, CMP w/ liner. Riprap, Earthen (includes open channels, natural channels, ditches, etc.), Concrete, Other: other material. Write in Notes. Depth In/Depth Out: Depth in feet to the pipe invert from the top of structure.Invert In: Invert elevation going into the pipe (should always be greater than invert out).Invert Out: Invert elevation leaving the pipe. Z Source: Source of elevation values. Can be from As-Built, Survey, Survey-grade GPS, or Map-grade GPS.Z Date: Date elevation data was obtained in the case of GPS or survey or approved in the case of As-Builts and survey that are part of a site plan.XY Source: Source for XY location of pipe. Can be from As-Built, Survey, Survey-grade GPS, or Map-grade GPS.XY Date: Date XY location data was obtained in the case of GPS or survey or approved in the case of As-Builts and survey that are part of a site plan.CIPP: Identifies if a pipe has been lined. CIPP stands for "Cured in place pipe."CIPP Date: Date lining was placed.CCTV: Identifies if pipe has had CCTV video taken.CCTV Date: Date of pipe video recording.Notes: Clarifying information about the pipe. Primarily for notes about the condition of the pipe found during field investigation. Can include notes about pipe condition and access. Old ID: Pipe ID from before structure ID system moved from a three-digit unique ID to four-digit. If the three-digit numeric suffix is '000' there was no structure at the end of the pipe. If PIPEID had a three-digit alpha prefix ending in 'P' the pipe does not have a structure on either side.
Description: This file represents the City of Charlottesville's Storm Sewer Drainage Basin layer in a line format. The Storm Sewer Drainage Basin layer (a separate file) is continually updated on a daily basis by City staff from the Public Service Division. Location data for the Storm Sewer Drainage Basin layer are received by Public Service staff (from various sources, such as GPS, plats, site plans etc.) and incorporated into this layer. The information contained in this file is NOT to be construed or used as a "legal description". Any errors or omissions should be reported to Public Service for correction.
Service Item Id: 5c0b7ae0186046839858a27dea1017b3
Copyright Text: Ron Cook City of Charlottesville - Public Service Division 305 4th St. NW Charlottesville, VA 22903 (434)-970-3633
Material
(
type: esriFieldTypeString, alias: Material, length: 50
)
Verified_Source
(
type: esriFieldTypeString, alias: Verified_Source, length: 50
, Coded Values:
[Previous Materials Evaluation: Previous Materials Evaluation]
, [Installation record (e.g., tap card): Installation record (e.g., tap card)]
, [Installation date after lead ban: Installation date after lead ban]
, ...4 more...
)